Need help sa intallation ng router sa Digitel DSL

Discussion in 'Digitel DSL' started by lorise_llane, Aug 22, 2009.





  1. Hello Guys!

    Need some help re. installation of a router (encore) sa digitel dsl with Static IP. first time ko kasi gamitin tong internet ng Digitel. I have also some questions that maybe you could answer with the ff. scenario:

    Scenario 1: ADSL>modem>PC
    I've tried to connect the modem supplied by digitel to other PC, copying the IP addresses, DNS server and other configuration (including the proxy setting) of the original connected PC. the problem is that i cannot connect to internet, local lang ang connection/limited connectivity. what might be the problem?

    Scenario 2: ADSL>modem(bridge?)>router(ppoeA?)>(number of PC)
    Can I request for further step by step procedure in installation and configuration. Yung mga IP/DNS addresses na naka-save dun sa connected PC ay ilalagay ba sa router? ano ilalagay nun sa LAN setting ng mga PC (Automatically obtain IP? AUtomatic detect? or still need to input the proxy server setting?)

    Tnx... I'm really glad may mga forum na ganito..
    God Bless us all.
     
  2. zedrik04

    zedrik04 Member




    tol try mo basahin ito baka makatulong sayo.

    http://www.pinoydsl.net/viewtopic.php?t=18683

    kc yan din problem ko noon.
    kung config mo ung router mo sa STatic IP need mo pa apply din tawag ka sa NOC tapos activate nila. pero hindi ka makakatawag don kc dadaan ka Hotline. which means antayin mo ang activation kung kaylan (kung tatalon ang bato or kapag puti na ang uwak!!)

    kung ako sayo, kulitin mo ung technician nila kc ako lahat ng number ng digitel tinawagan ko hanggang pumunta d2 sa amin ang technician nila.
     
  3. nabuto

    nabuto Member




    scenario 1:
    modem should be in bridge mode.
    sa control panel, open mo ang network connections, right click local area connection, select internet protocol, click properties, select use the following ip address at ilagay ang info na binigay sa yo. (dapat activated na ang static ip na binigay sa yo para gagana.)

    scenario 2:
    modem in bridge mode.
    router in static ip mode. (enter the info that was given to you.)
    lan ng pc ay obtain automatically para less work para sa yo.

    if followed correctly, everything should work fine.
     



  4. Tnx for the reply; nabuto/zedrik04

    Comment on scenario 1;
    Gumagana na dati pa yung Static IP dun sa original PC, then tinanggal ko lang yung connection nya nilagay ko sa bago PC, just copying the configuration sa network connection (IP address, DNS, Proxy). Di sya gumana, nag-try ako magsimulate using ung maliit na CD kasama ng H9200, may simulation kasi dun, yung first two checks nya pass, sya then dun sa third nagfafailed, with ff. warning;
    1.baka mali yung username and password.
    2. baka daw sa firewall na naka-installed.

    so I disabled the firewall... wala pa rin. yung username and password wala naman akong alam na nagfill-up ako.
    ano kaya naging problem? di ko na-access yung modem configuration...


    Scenario to... so sa STATIC IP dapat nakaset ung sa WAN setting ng router? sabi naman sa ibang link sa PPPoE?

    tnx again guys
     
  5. nabuto

    nabuto Member




    walang username at password pag static ip ka.
    parang wala namang kinalaman ang firewall sa koneksyon e.
    static ip sa wan kapag static ip ka na (sabi nila pppoe kapag dynamic ka pero ang alam ko e dhcp ang digitel kasi wala naman tayong username at password. automatic ang pagkonek kaya dhcp ang koneksyon at hindi pppoe)
     



  6. Case Closed

    Tnx guys...

    Connection workin'!

    Keep rocking!
     
  7. nanski99

    nanski99 Member




    How do i go to the modem configuration website? 192.168.1.1 don't seem to work anymore after i have my static ip. They changed my modem to Prolink HR9200AR.

    It is working perfectly alright using a pc directly connected to a Belkin wireless router and from a laptop connected thru wireless.
     



  8. guys i need help. my setup is one dvr for cctv camera and two comp conected to digitel dsl connected to linksys wrtg yung bagong model na router. May static ip at yung neon green yung adsl router. dati napagana ko na yung setup. niconfigure ko sa router yung static ip tapos nitry ko assign dhcp ng router starting ng 192.168.1.2 tapos nilagay ko manualy sa tcpip settings ng naka-lan na comp yung ip add(192.168.1.2), gateway(192.168.1.1), dns(192.168.1.1) at subnet mask. Nung malaks ulan recently nasira ang connection at router namin. pinalitan ng digitel yung adsl router at pinalitan din namin router namin. ngayon hindi ko na mapagana yung buong setup using the same way na napagana ko siya dati. help guys kung alam niyo kung pano share yung internet using yung new linksys wrtg na router thanks
     
                                 

Share This Page