[T]How to make Bootable USB Windows XP Installer

Discussion in 'Tips, Tricks and Howto' started by Warlock1981, Aug 19, 2010.


  1. Warlock1981

    Warlock1981 Member




    Download the installer of WinSetupFromUSB

    http://www.msfn.org/board/topic/120444- ... -with-gui/

    In this guide I used the version build 0.2.3

    Once downloadeded, run the installation software and follow the installation wizard. At the end of the installation, the software will launch.

    Plug your USB Flash Drive with a minimum size of 1 GB or more
    Format it using

    HP USB Disk Format Tool

    http://www.softpedia.com/get/System/Har ... Tool.shtml

    http://www.pcworld.com/downloads/file/f ... ption.html

    http://files.extremeoverclocking.com/file.php?f=197

    or you can use the WinSetupFromUSB RMPrep_USB format tool

    [​IMG]


    Step 1: Insert your (Legit)Windows XP CD into the CD ROM drive and click Browse
    If your Windows XP installer is in ISO you need to mount it in a virtual CD/DVD ROM using magicdisc and the like
    http://www.magiciso.com/tutorials/miso- ... erview.htm
    Step 2: Enter the destination path on the PC
    Step 3: Select your CD ROM drive where your CD is Windows XP and click OK
    Step 4: Click Refresh and then go on the small arrow just to the left and select the USB key that you used to boot XP
    Step 5: Select Fixed
    Step 6: That everything is ready you can just click on the GO
    Wait for the copying procedure. Then close the software (you are informed when the copy is complete)
    Installing Windows XP
    In a first time you connect the USB to your netBook and go into the BIOS
    Then set your BIOS to boot your PC on USB key;
    Once done, save and restart your PC;
    Here, you'll have two lines in the GRUB menu;
    The first is to select the startup of the installation procedure
    The second line will be for the rest of the installation and the first boot of Windows XP;
    Therefore boot on the USB key until Windows XP is fully installed.
    Follow the installation instructions as for a normal installation
    Now your Windows XP is installed with your USB key!

    *************************************************************

    Using 1.0 Beta6

    download the latest installer from the link given above,and extract it to any path of your computer partition and run it, then follow the guide below

    Plug your 1GB USB Flash Drive and then run the WinSetupFromUSB

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    after job done restart your computer and go to BIOS

    Then set your BIOS to boot your PC on USB key;
    Once done, save and restart your PC;
    Here, you'll have two lines in the GRUB menu;
    The first is to select the startup of the installation procedure
    The second line will be for the rest of the installation and the first boot of Windows XP;
    Therefore boot on the USB key until Windows XP is fully installed.
    Follow the installation instructions as for a normal installation
    Now your Windows XP is installed with your USB key!


    *******************************************************************************************************************

    Using Unetbootin

    Download Unetbootin

    Code:
    http://sourceforge.net/projects/unetbootin/files/UNetbootin/494/unetbootin-windows-494.exe/download

    Format USB to FAT32 Using HP USB Disk Format Tool


    Install Unetbootin and launch the application from the shortcut in your programs menu

    Click the "Disk Image" radial option and select "ISO" from the drop-down box. Click the "..." button and select the Windows XP ISO file from your hard drive.

    Click the "Type" drop-down box and choose "USB Drive" from the options. Click the "Drive" drop-down box and select your USB pen drive's letter from the list. Click "Ok" to create the Windows XP bootable USB.
     
  2. CodeHunter™

    CodeHunter™ Member




    Tricky! commonly used by other pc techs. salamat po sa tip... very useful po sa akin at sa ibang hindi pa nakakaalam.^^

    Ito ang tunay na TIP... hahaha naalala ko tuloy ung isang tread dito. Kala ko TIP and tricks...^^
     
  3. Warlock1981

    Warlock1981 Member




    nyahahaha

    sa lahat ng tools na ginamit ko d2 ako na satisfy ^_^ nd it works..
     
  4. friday13

    friday13 Member




    gumagana dito ang windows 7 installer Warlock?

    thanks nga pala sa pag share
     
  5. kwiki

    kwiki Member




    Good share Warlock.
     
  6. Warlock1981

    Warlock1981 Member




    for windows 7

    plug your USB Flash Drive (4GB in size) and insert windows 7 dvd or mount it to virtual drive if it is in image..



    open command prompt

    type DISKPART and hit enter

    type LIST DISK and hit enter.

    type SELECT DISK 1 and hit enter

    type CLEAN and hit enter

    type CREATE PARTITION PRIMARY and hit enter

    type SELECT PARTITION 1 and hit enter

    type ACTIVE and hit enter

    type FORMAT FS=NTFS and hit enter

    (Format process may take few seconds)

    type ASSIGN and hit enter

    type EXIT and hit enter

    now go to your windows 7 drive and copy the entire content and paste it to your USB Flash drive

    boot to your USB Flash drive and the installation will start ^_^
     
  7. pektong

    pektong Member




    sa win7 at vista mas madali compared sa xp. thanks sa tip bro mas madali ito compared dun sa ibang tips over the net.
     
  8. klyster

    klyster Member




    May nakukuha namang 7 to USB sa microsoft mismo
     
  9. Warlock1981

    Warlock1981 Member




    yes sir pero sometimes may ibang user kasi na binabago ang installation ng windows 7 at kapag gagamitin mo yung sa microsoft, bale di na siya valid windows 7 image(iso) file..

    yung Windows 7 Ultimate(valid iso) na na download ko bale inedit ko to enable other versions Home basic, home premium and profession, nung sinave ko ulit tpos transfer sa USB Flash Drive using the tool of microsoft hindi na siya valid windows 7 iso so yung sa commad na lang ang other option..
     
  10. gAracUh

    gAracUh Member




    sir bakit po my lumalbas sa akin na could not load etc...
     
  11. Warlock1981

    Warlock1981 Member




    did you format the usb flash drive?

    what build number ang ginamit mo, dun sa link ng tool try mo ang lower sa 0.2.3 or used the latest version..
    kasi wala naman akong na encounter na problem and i am using a 1 year old USB Flash Drive


    --edit--

    go to page 1 I included magiciso to mount windows xp installer that is in an ISO(image) format
     
  12. gAracUh

    gAracUh Member




    cge sir try ko. thanks
     
  13. ibien

    ibien Member




    sir warlock, pwede po ba gamitin ang external hard disk dito?
     
  14. KennethM

    KennethM Guest

  15. Warlock1981

    Warlock1981 Member




    I am using wintoflash also but sometimes installation is failing if success you cannot install MS Office, based on my experienced only

    the tool i am posting is the one that works for me,ang mali lang ni gracuh is he extracted the windows installer from ISO kaya ayaw gumana..
     
  16. Warlock1981

    Warlock1981 Member




    i am not sure, kung gagana kasi never tried it..
     
  17. jayr10000

    jayr10000 Member




    sana may mag try then magbigay din ng feedback,,,
     
  18. Warlock1981

    Warlock1981 Member




    by the way sa booting selection niya press "b" or enter, then another "b" or Enter but make sure that the first option is highlighted not the second one or else it will boot to the current OS installed..
     
  19. ibien

    ibien Member




    ma try nga sa external hard disk. sana gumana. ung flash drive ko kasi pinitik nanaman dito sa shop, patay pa naman si surveillance kaya hindi nakita.
     
  20. ibien

    ibien Member

                                 

Share This Page