Setup>Globe EchoLife BM622 WiMAX CPE to Huawei BR-6204WLg

Discussion in 'Globe DSL' started by timo_fobia, Jun 4, 2010.







  1. Hello World!

    I figured out a way to set the
    Globe's EchoLife BM622 WiMAX CPE modem
    to a Huawei BR-6204WLg wireless router
    without changing any setting in the modem..

    This way I'm 90% sure it's safer..

    Here's How I did it:

    First connect your PC's Lan port
    to the Modem's WAN

    EchoLife BM622 WiMAX CPE

    http://192.168.1.1/
    Login:user, Pass:user

    [Copy all visible information in the modem]
    [Take note of the following..]

    On Status>Wan
    ----------------------------------------------
    Status Connected
    Mode Route[default]
    IP Address XX.X.XXX.XXX
    Subnet Mask XXX.XXX.XXX.X

    Default Gateway Pri DNS Sec DNS
    XX.X.XXX.X XX.X.X.XXX XX.X.X.XXX
    ----------------------------------------------

    On Status>Lan
    ----------------------------------------------
    IP Address 192.168.1.1[default Address]
    ----------------------------------------------

    Second connect your PC's Lan port
    to the Router's Lan 1

    Huawei BR-6204WLg wireless router

    http://192.168.2.1/
    Login:admin, Pass:1234

    On Home>General Setup>WAN
    [Set the following datas]
    ----------------------------------------------
    WAN Access Type Static IP
    IP Address 192.168.1.2
    Subnet Mask 255.255.255.0

    [Input the Addresses noted from the]
    [EchoLife BM622 WiMAX CPE's]
    [Default Gateway,Pri DNS, Sec DNS]

    Default Gateway Pri DNS Sec DNS
    XX.X.XXX.X XX.X.X.XXX XX.X.X.XXX

    [And click the Clone MAC Address, then Apply]
    [Wait for a few seconds]
    ----------------------------------------------

    On Home/General Setup/LAN
    [Set the following datas]
    ----------------------------------------------
    IP Address 192.168.2.1
    Subnet Mask 255.255.255.0
    Default Gateway 0.0.0.0
    DHCP Server
    802.1d Spanning Tree Disabled
    Clone Max Address 000000000000

    [And Apply, then wait for a few seconds]
    ----------------------------------------------

    3rd Connect your PC's Lan port
    to the Router's Lan 1
    and the Router's WAN port
    to the Modem's Wan port
    wait for a few seconds

    4th Goto>http://192.168.2.1/
    Login:admin, Pass:1234

    On Home/Status/Status Info
    [Check the following datas]
    ----------------------------------------------
    TCP/IP Configuration
    Attain IP Protocol Fixed IP
    IP Address 192.168.2.1
    Subnet Mask 255.255.255.0
    Default Gateway 192.168.2.1
    DHCP Server Enabled

    WAN Settings
    Attain IP Protocol Fixed IP
    IP Address 192.168.1.2
    Subnet Mask 255.255.255.0
    Default Gateway 192.168.1.1

    [If datas above are correct, all systems go!]
    ----------------------------------------------
    [You can also access the modem through ]
    [the router, just Goto>http://192.168.1.1 ]

    Enjoy!

    8)
     
                                 

Share This Page