PL-DSL1 Router Configuration Mode - PPPoE Only

Discussion in 'Modem Router Config Settings' started by dyoddyowel, Mar 27, 2007.


  1. kurtpogi

    kurtpogi Member




    Ayoko i Hard reset kasi baka mawala net connection ko eh
    Eh dati un ginawa ko nawala net ko
     
  2. dyoddyowel

    dyoddyowel Member




    no pain no glory... hehehe...

    actually kung sure ka na pppoe ka at tama ang vpi/vci mo at susundin mo ng tama yung guide eh magkakaron ka ng net connection...

    dahil yung screenshot sa first page eh ako mismo nag setup at kinuha ko sa working connection eh...
     



  3. spam removed...
     



  4. Hey, new guy here. May problem ako sa PL-DSL1 (black modem with 4 LAN slots) ko, kahit i-hard reset ko siya, ayaw gumana ng admin 1234 na UN/PW, may iba ba silang binago dito? :(

    Edit: Stupidity attacked me. Okay na. :)
     



  5. hello guys, another newbie here... i've done the steps from the guide and eto ang error nakukuha ko: "...computer does not respond..." tama naman yung username at password na nilagay ko (username@pldt and then ung password). service name is blank. Pag check ko sa status ng modem, nakapag-acquire sya ng IP add. Ayaw lang talaga nya mag log-in kaya back to bridge mode ako. Ung firmware ko ung 11/2006 version. Natry ko na ding i hard reset tapos ulit ung steps, pero same error pa rin. Tanung ko lang kung naka PPPoE ka na, pwede ba i-pa non-PPPoE un sa PLDT? Kase 3 sa mga neighbors ko na naka PLDT dsl na same plans, they don't require usernames to use their dsl. Ung sa kin kakabit lang this week. Saka ung speed ko nakafix sa 350-370 kbps, plan 999. Mapa umaga man o hapon, ganyan speed nya. Any comments guys??
     
  6. dyoddyowel

    dyoddyowel Member




    are you sure pppoe ka? kung bridge mode ang modem mo me ginagamit ka bang dialer sa windows?

    me nakukuha bang IP address ang computer mo galing sa modem? anong IP?
     



  7. yes sir! bale sa network connections ko, merong local area at broadband. ung broadband nya may details na WAN miniport (PPPoE). Ung Lan ko naka-automatic private address, nag-assign na lang ako (192.168.1.33) as i've read sa guide.
     



  8. question po, im using the zyxel prestige 600 series and an edimax 4port router, naka ppoe ako, may username and password. so if i foloow this guide, yung modem san dapat nakasaksak? sa wan ng router or sa lan port na lang ng router?

    thanks
     
  9. dyoddyowel

    dyoddyowel Member




    no need to follow this guide if you have a separate router...

    yung mga guide na ginawa ko para sa mga walang router lang... pero gagana pa rin naman kahit router mode yung modem then me isa ka pang router...

    to answer your question, it will work both ways...

    if you plug it in the wan port, set your edimax router to obtain ip automatically...

    if you plug it in the lan port, disable dhcp server in edimax router and it will act like a switch only...
     



  10. ok, so if im not gonna foloow this guide, sa wan ng router ko isasaksak, kung ano yung settings ng modem, as is na? bridge mode, pppoe?

    pag sa lan port ko isasaksak, dapat naka routing mode, right?

    yung edimax na router, need ko ba i-set as pppoe?

    thanks
     
  11. dyoddyowel

    dyoddyowel Member




    leave your modem as is, bridge mode, plug it in wan port, then set your edimax to pppoe.... then erase your pppoe dialer in windows...
     



  12. Mine is PL-DSL2

    pede po ba tong configuration na to or may separate guide?

    help please...

    1 week na kc tong problem ko sa linksys ko, unstable yung speed ng connection lalo na kung may 20 users, biz lite yung sa akin which is sana around 2mbps, nakukuha ko lang during peak hours is only 60-300 kbps, before naman kasi hindi ganito yung speed ko kahit peak hours pa.

    kakabili ko lang pala ng linksys *BEFSR41, so di ko talaga alam san yung problem.

    hindi naman ako nadidisconnect, bumabagal lang talaga yung connection.
    I'm using 2 switches 8 ports and 16 ports

    pahelp naman please, try ko na direct na lang sa modem yung setup without my router baka maging stable na yung speed.

    thanks
     
  13. dyoddyowel

    dyoddyowel Member




    kung pppoe ka, you can use this guide as basis only... the setup will be the same although it looks different...

    but maybe the problem is on pldt's side...

    if you can return the linksys router, change it to a different brand or model... search around this forum for BEFSR41 problems...
     



  14. do i still need a switch on this modem?? kc db 4 ports na sha?
    if i follow these steps, i can share my dsl connection to as much as 4 PC's even without a separate switch???
    thanks!!
     
  15. dyoddyowel

    dyoddyowel Member




  16. Pano ba mag port forward dito? sa NAT lang diba? for example, gusto ko open yung port 45950 ano lalagay ko lang sa start port and end port? Yung ip address ba ng computer ko 192.168.1.33? or yung gateway 192.168.1.1?

    [​IMG]
    ayaw pa din kasi ma open yung ports.
     
  17. dyoddyowel

    dyoddyowel Member




    kung ano yung IP address ng computer kung saan mo gusto open yung port, yun ang lalagay mo...

    mas maganda kung static local IP ka...

    kung dynamic local IP kasi, once na nagbago IP mo, balewala na yung port forward rule na ginawa mo...
     



  18. May tanong ako pero router specific kaya pede dito ko na ilagay?

    Paanu i setup yung pldt dsl1 para ma forward yung web traffic directly sa comp ko? kasi di ako maka gamit nang mga VNC programs tsaka gusto ko gamitin yung comp ko as a tunnel from work. Hindi kasi user friendly eh. Na try ko na kuah nang MAC address at hanapin yung manufacturer wla eh.
     
  19. dyoddyowel

    dyoddyowel Member




    you just needed to open the proper ports...

    find out what port vnc is using then open it in nat in PL-DSL1, put your computer's local ip address (the computer where vnc is installed)...
     



  20. I forwarded all the proper ports then set the Remote Management control to Lan Only.

    If I did that I get nothing and if I set it to all then when I go to the address using a dyanamic dns host I get my router's login page.

    Used this site as a reference:
    http://www.boutell.com/newfaq/creating/hostmyown.html
     
                                 

Share This Page