Aztech DSL5001en to use as AP only.. HELP!

Discussion in 'Globe DSL' started by foxhunter01, May 5, 2014.





  1. Hello mga sir meron po ako extra Aztech DSL5001en pwede ko po ba ito gamitin as AP only yung parang repeater? Currently using Prolink H6300G as modem/router. Plan ko po kasi sana i-cover yung dead spot ng wi-fi dito sa bahay pwede ko po ba i-connect yung prolink and aztech using RJ-45 cable and yung 2 router eh pwede mag transmit ng wi-fi signal? thanks!..
     
  2. t84

    t84




    TS
    Diba ang input ng Aztech DSL5001en ay RJ11? paano masasaksak ang RJ45 sa RJ11 socket?
     



  3. yan din po isang question ko eh kung pwede maging input yung Ethernet port (RJ45) ng aztech. Kasi dati yung sa Aztech DSL 605 EW ko although 4yrs ago na config ko sya na AP lang then yung input signal from single port modem eh kahit saan dun sa 4 port then nagamit sya as AP. Hindi ko nalang po maalala kung paano ko yun nagawa. :(
     
  4. motion55

    motion55 Member




    Pwede. You can connect the two at the LAN ports (RJ-45 connectors) using ethernet cables.

    Para ma access mo parehong devices, you have to change the IP address of the DSL5001en so that it is in different IP address from the main DSL modem but still in the same subnet. For example, if the Prolink IP address is 192.168.1.1, change the IP address of the Azrech to 192.168.1.2.

    Also you have to disable the DHCP server on the DSL5001en so it will not interfere with the DHCP server on the Prolink.
     



  5. Thanks for the reply sir. Do I need to change the firmware of the DSL5001en sir? thanks!..

    Sir yung Router IP Address under LAN>>DHCP settings po yung need ko palitan dba? Bkit po kuya ayaw masave? Lagi nagrereconnect? Thanks
     
    Last edited: May 5, 2014



  6. Help naman po paano i-change yung IP address ng DSL5001en? need pa po ba palitan yung firmware. Ayaw po kasi masave yung new IP Address na inEnter ko nagrereconnect yung router pagclick ko ng "apply" thanks!
     
  7. t84

    t84




    wan niyan port galing sa rj11 kung walang nalasaksak de walang internet source siya.

    ts bumili ka lang ng cdrking na wireless router.
     



  8. Yung sa RJ45 po ba hindi pwedeng maging source ng internet kung nakade activate na yung DHCP at nakaconnect sya sa ibang switch/router? Tia
     
  9. motion55

    motion55 Member




    Bakit kailangan ng DSL5001EN ng internet? Ang purpose lang ng Aztech ay bridge to connect wireless clients to the Prolink. Diba kung magdadagdag ka ng mga PC na pwede maka-connect sa modem, maglalagay ka ng switch/hub? Isipin mo ang Aztech ay parang wireless hub/switch na lang.

    Ordinarily dapat naka disable ang DHCP server ng Aztech at sa Prolink lang may DHCP server kasi yun ang internet gateway. Pero kung naka-enable ang DHCP ng Aztech, dapat i-set mo siya na ang default gateway naka point sa IP address ng Prolink. Ito ang information na kailangan ng mga clients na doon ang source ng internet.

    As to the problem ng ayaw mag-save, kasalanan ng ISP at naka-cripple ang firmware. Pero usually may secret password yan para ma-unlock ang full features ng firmware. Search mo na lang kung paano. Otherwise, kailangan palitan ang firmware.

    http://www.pinoydsl.net/forums/modem-router-config-settings.29/
     
  10. t84

    t84




    only way to find out is to connect them yourselfna parang switch/hub, iconfigure mo sila na parehong subnet sila... tapos tinan mo kung successful...
     



  11. salamat sa tulong mga boss.. pasensya na po beginner palang po kasi ako sa Networking. Please correct me if wrong. Ang plan ko po kasi is ROOM 1 prolink>> connect sa internet thru rj 11
    ROOM 2 Aztech>> deactivated DHCP, connected to Prolink thru RJ45 lan cable

    Tama po ba dapat ko gawin? so yung nasa room 1 wireless gadgets magcoconnect sila sa using SSID ni prolink
    yung sa room 2 naman magcoconnect sa SSID ni aztech.

    Another question po nakita ko po sa specs ng DSL5001en meron sya WDS support. Paano po kya ito gamitin?

    salamat po ng marami!..
     
    Last edited: May 8, 2014



  12. na set ko na po sya as relay. Ang problem ko naman po is pagconnected na yung aztech nawawalang ng internet signal yung PC na connected kay prolink (main) pero kay aztech may internet po. tia
     
    Last edited: May 8, 2014
  13. motion55

    motion55 Member




    Disable the DHCP server ng Aztech.
     



  14. tinry ko nadin po disable DHCP ganun padin po result. pagRELAY po sinelect ko tapos Router IP 192.168.254.254 / SM: 255.255.255.0 / Server IP: 192.168.254.200 ganun padin po result napupunta po sa aztech yung signal ng internet pero sa prolink is nawawalan ng internet signal. Hindi po kasi mabago yung Router IP pagnagclick ako ng "APPLY" eh matagal po magsave then "connection reset" na po. Maybe need ko na po palitan yung firmware kaya hindi mapalitan yung router IP? Ang problem po is wala ako makita na firmware meron sa aztech for turkey only.

    Next option ko po is yung Prolink H6300G nalang gawin ko na AP pero need ko din po change yung firmware right?
     
  15. t84

    t84




    Trial and Error nalang...
    no firmware change dapat....

    If all else fails just get a new wireless router and move on
     



  16. ok na po sir!.. thank you so much for the help.. :)
     
  17. motion55

    motion55 Member




    The reason it probably did not work the first time is I forgot to mention na after disabling the DHCP server, you have to re-connect the PC na walang internet to obtain a new IP address from the DHCP server ng Prolink.
     



  18. Hindi po sir. Bali ang nakita ko po na kulang is yung sa may ppoe something dapat po bridge mode po yung i-select then nasesave na po yung new router IP. Nakita ko lang po sa ibang site. :)

    Bali ang binago ko po are:
    1. Select bridge mode
    2. Disable DHCP
    3. Change router IP.

    Then ok na po. Parehas ko po tinry sa aztech and sa prolink same po pumwede.

    Final set up ko is yung aztech na yun main then yung prolink yung ap lang kasi madami port yung prolink na need ko dun sa location ng Lan.

    Thanks po ulit.. :)
     
                                 

Share This Page